world class diamond tools & machinery
Call 1300 657 296

Universal diamond core drilling machine which can be fixed in a drillstand or used as a hand held drill.

WEKA DK 16 hand drill pic logo

1600 watt

3 speed – 580/1400/2900 rpm

Drill up to 60mm by hand and 130mm with stand

The new DK16 is characterized by their enormous drilling capacity and thus the wide drilling range of up to 160 mm.

All versions offer the following features.

3 – speed gear
Large drilling range (see tech. Data) with easy speed adjustment to each hole diameter.

Oil-bath lubrication
Optimal gear lubrication for high efficiency and durability.

Overload clutch
Protection for operator as well as for machine and tools against mechanical overloads. An indispensable safety element for hand operated core drills.

Intellitronic – the new electronic system starts the motor by means of a micro controller softly and thus avoids a too high start current. When exceeding the over current threshold the electronic is showing this by a pulsating of the motor. If the operator now decreases the feed power, the motor works normal again. If the operator does not decrease the feed power the electronic switches the motor off after some seconds. After this action the motor can be started immediately. It is not required to wait a time period before starting again like on a thermal motor overload switch. Thus the Intellitronic avoids overload conditions and increases safety, the operators comfort and the motors life time.

Leveling aid
Two integrated levels enable exact horizontal and vertical working positioning.

Metal Casing
In relation to plastic cases the aluminum case of WEKA drills is mechanically and thermally more stable and durable.

MK Product List

Contact Us

14 Water Rd, Preston, Victoria 3072 Australia
PO Box 8454 Northland VIC 3072

Phone - 1300 657 296 or 03 9484 5034
Fax - 03 9484 5039